best driveway sealer

Driveways can really uplift a home’s appearance. Unfortunately, they get unprecedented exposure to the elements and that makes them highly susceptible to damage. And to be honest, they don’t feature very highly on most homeowner’s lists of home maintenance chores.

But this can be an expensive mistake for many people because driveway repairs can get pretty costly, especially when they have to be extensive. Fortunately, a good driveway sealer can help avoid such a scenario, and even keep your driveway looking good for many years. But then there are good and bad driveway sealers, and here are the best driveway sealers at the moment.

Best Driveway Asphalt Repair & Sealer in 2018

10Cofair 609MD Asphalt Repair Fabric

This is a great asphalt repair kit. It is very easy to use, and it is available at a very affordable price. So, its value for money proposition is quite defensible. Before using it, you should clean the driveway. Otherwise, application takes just a few seconds, and it involves pressing the substance in place to patch cover and seal the surface.

Due to its sealing abilities, this product should make your driveway waterproof and allow it to last for much longer without experiencing any damage. Another huge advantage to using this particular sealant is that you can start using the driveway right away, even with vehicles.

9Useal USA Hot Liquified Rubber Driveway Crack Sealer

This sealer is mostly intended for commercial purposes, which also means that the results it delivers are beyond anything most other market options can ever give you. The only gripes you might have with this particular product is that it requires a little tougher preparation process because you have to heat it first.

But that takes just 20 minutes. Of course, you should also be careful from there since you will now be dealing with a hot substance. Otherwise, this sealer provides a weather resistant coating that will prevent further damage to your driveway by the weather and other substances. It is also the closest thing to professional sealing services you can get, and at a fraction of the cost because you can apply it yourself.

8DryWay Water-Repellent Concrete Sealer

DryWay concrete sealer can keep your driveway safe from water, mold, and other forms of deterioration. The protection should last for several years. And although the film that this sealer provides can peel off, it will provide excellent protection to your driveway because it can resist UV-rays, oxidative degradation, and even heat.

Other things this product can protect your driveway against include cracking, and corrosion as well as things like algae and mold. Cleaning your driveway after using this sealer will also be much easier due to the unique extra layer it creates on your driveway. The manufacturer claims that you can expect about 5 years of protection from this sealer, which is pretty good.

7Rainguard Ready to Use Concrete and Masonry Waterproofer

Excellent resistance is something this product can provide to your concrete driveway. The product has a deep penetrating power that ensures that your driveway will be protected from things like rain, salt, oil, gas, and anti-freeze for several years. In fact, the product comes with a 10-year satisfaction guarantee.

It will also not mess with the appearance of your driveway, either during application or over time. Some sealers start to yellow as time goes by, but this version will leave a nice sheen that will not interfere with the natural appearance of the surface itself.

6Red Devil 0637 Blacktop Driveway Repair Caulk, Black

This driveway sealer has proven itself a worthwhile choice in this market niche. The 0637 is an acrylic asphalt sealant that can offer lasting, versatile, and water-resistant sealing to driveways and even parking lots.

It has excellent adhesive powers, which mens it will do a great job of keeping your driveway protected from water and frost damage. The sealer will also provide an easy water clean up experience. All these upsides clearly explain why it ranks so highly in a market that is filled with dozens of driveway sealers.

5E-Z Stir Driveway Asphalt Filler/Sealer

If you want a filler that can also brilliantly fill the role of a sealer, then this is it. The product is designed specifically for blacktop surfaces. You will also love the fact that this product is easy to use, you just need to stir it before you start applying it.

The product will also dry pretty fast because in just 4 hours your driveway will be ready to be used as normal. However, you will have to avoid driving on it for about 24 to 48 hours.

4Quickrete Concrete Crack Seal Natural

Described as easy to use, this driveway sealer is has proven itself the ideal choice for many users in need of a sealer for their driveways. The results it produces can last for a long time. The product is designed especially for concrete surfaces, and no extra work will be required before using it, for instance, mixing and so on.

You only need to pour the sealer from the bottle into the desired areas. You also don’t have to worry about this product affecting the appearance of the surfaces on which it is used on, it has a natural color that will leave the appearance of your driveway, sidewalks and patios unaffected.

3Flex Seal Liquid Giant Gallon

This Flex Seal product will protect your driveway from water, and it will fill in any cracks and holes in the process. More importantly, the protection it provides should last for years. The compound will even stand up to hostile weather brilliantly by not sagging or dripping due to summer heat.

And neither will it start to crack or peel due to the cold in the winter. In other words, this is a sealer that is designed to survive all seasons. The other upside to using this particular sealer is that it does not contain any toxins. Finally, this product is very easy to use, as you can pour it, use a brush, or even use a roller when applying it to the desired areas.

2Foundation Armor Penetrating Clear Solvent-Based

For those who have a concrete driveway, this sealer is one of the leading options in the market today. It has lots of penetrative power as it is based on Silane-Siloxane solvent. However, its true power is demonstrated by its ability to keep driveways protected from weather damage.

Its most notable aspect is its ability to resist water, alkali, and even concrete dusting. It will even resist damage that is caused by de-icing salts as well as any harm that freezing and thawing cycles might produce. Things like mold, mildew and fungus will also not have a chance to ruin your driveway once you use this particular brand of driveway sealer.

1EnduraCoat Acrylic “Wet Look” Semi Gloss Concrete Sealer

As the name says, this product is 100% acrylic. This is a very strong solvent that brings with it amazing concrete sealing properties. The sealer is able to give your driveway a nice “wet look”.

Other than that, the protection it provides will last for many years. It does not even cause a yellowing of the driveway surface like some alternative sealing products do, and neither does it leave behind a bad odor. But one of its most compelling draws is the fact that it is highly affordable.

Can’t Find What You’re Looking For? Check these suggestions:

How to Apply a Driveway Sealer

Driveway sealingSealing your asphalt driveway is very important to keep it looking as good as possible for as long as possible. If the driveway isn’t sealed, then water can seep through its cracks and settle around its base. Over time, this water can erode the base of the driveway and cause a number of nasty problems including buckling, cracking and the formation of potholes.

It isn’t just people who have asphalt driveways who need to worry, however. Even homeowners with concrete driveways should take the time to seal them. That’s because water can get down into the cracks and then when the temperature drops, it can expand and cause damage. Sealing the concrete driveway can limit the amount of water it can absorb and prevent such problems from occurring.

Some people avoid sealing their driveways because they feel that it’s too complicated of a process or that it will take too much of their time. Fortunately, neither of these reasons are correct. Sealing your driveway can be a painless process and can result in a better looking and more durable driveway. Here are a few tips to get you started.

Sealing an Asphalt Driveway

Preparation

The first thing you have to do before you begin working on your driveway is to take a few moments to prepare it. During this phase, you are going to want to read and follow all instructions on your product.

As a general overview, we’ve included the following steps so you can get a feel for the process, but the following tips shouldn’t take precedence over your particular product’s guidelines.

Allow Proper Drying Time  — Most sealant products dry in only a few hours, but that doesn’t mean that your driveway is ready to be used. Most products insist that you wait anywhere from 24 to 72-hours before you park or drive your vehicle on the driveway.

Use in Proper Weather — It’s also important that it’s not too cold before you apply the product. Most sealants require a temperature of at least 60-degrees Fahrenheit before they can be used. Also, make sure that it’s been this temperature for at least 24-hours before the repair and 24-hours after. Also, make sure that it hadn’t rained recently or isn’t going to rain for at least 48-hours after the product has been applied.

Be Careful in Foggy Areas — If the place where your driveway is located has morning fog or dew, then you need to take extra precautions. If you anticipate morning fog or dew, then be sure that you apply your product after 2 pm to prevent the sealant from washing off.

Don’t Use on Steep Slopes — If your driveway is sloped more than 20-degrees, then you shouldn’t use sealant on it because it will just end up rolling downhill during the application process.

Don’t Use Immediately After Repairs — Have you recently filled a pothole in your driveway? If you have, then you’re not going to want to immediately seal it. Wait for at least 4-months before sealing your driveway after a pothole filler has been used. If you’ve used a crack filler, you don’t have to wait as long, but you do need to wait for it to cure.

Use the Right Product—Don’t use asphalt sealant on masonry or concrete. There are sealants exclusively for those surfaces.

Applying the Driveway Sealant

Now that you’ve gone over some of the things to think about before sealing your asphalt driveway, it’s time to actually work on sealing the driveway. While product instructions should always be followed, below are a few general guidelines for applying driveway sealant.

Clean the Surface

The first step should be to clean any and all debris from the driveway’s surface. Using a broom make sure that the surface is completely clean before you proceed.

Trim Around the Driveway

The next step is to trim around the driveway. Make sure that remove all vegetation that touches the driveway and also ensure that all non-asphalt surfaces adjacent to the driveway are properly taped off.

This means that if you have a concrete patio next to the driveway that you’ve taped it so that the sealant won’t get on it. After all, asphalt sealant can ruin other surfaces such as concrete and brick.

Begin Pouring

Open your bucket and pour the sealant on the asphalt. Be sure to do small sections at a time so you have time to spread it before it starts setting up.

Begin Spreading

Using a squeegee tool made specifically for spreading driveway sealant, spread a thin layer of the product down the driveway. Ensure that each coat you lay down overlaps with the previous coat so that the entire surface of the driveway is covered.

Don’t Stop

Once the process has been started it must be completed until it’s completely finished. Make sure that you plan ahead to ensure that you don’t have to redo the process.

Sealing a Concrete Driveway

While I don’t have the space to cover all of the details involved with sealing a concrete driveway, I’ve included a brief overview that will give you an idea of what’s involved with sealing a concrete driveway. Make sure that you follow your product’s instructions before you begin.

Allow the Concrete to Properly Cure First

Before you apply a sealant to a concrete driveway, you are going to want to make sure that it has properly cured. This means leaving it alone for 30-days after the concrete has been laid before you apply a sealant that will penetrate into the concrete.

Clean the Concrete

The next thing you’re going to want to do is clean the surface of the concrete. This means using a push broom to remove all particles from it and using a pressure washer to remove oil stains that may have accumulated. Once the concrete has been washed, please allow an additional 24-hours so that it can fully dry before trying to seal it.

Apply the Sealant

Concrete sealants can be applied in a number of different ways. Usually, they can be rolled, brushed or sprayed on the surface. Always consult with your sealant’s instructions to find out the method that the manufacturer recommends for applying their product. This will ensure the best results possible. No matter which method you use, however, be sure that the product is applied evenly over the entire surface.

Allow it to Dry

As with asphalt sealers, it’s important to give the concrete sealer time to dry. While most sealants are dry to the touch within hours, it’s important to give them at least 24-hours to cure before you drive or park your vehicle on them. This will ensure that you get the best results possible.

SHARE