Circular Saws are without a doubt one of the more important tools a homeowner, workman or DIY enthusiast can have in their tool collection. That’s because these tools are not only inexpensive and pretty easy to use but also because they are capable of doing so many different jobs. These tools can be used for not only cutting wood but can also be used for cutting sheetrock, masonry, and plastic. With the proper blade, they can even be used to cut through thin metals.

The tasks these tools can accomplish can vary greatly from saw to saw, however. And that’s why handymen are always on the lookout for the best models available. To further that end, we’ve listed ten models that we feel are currently the best ones that can be bought at the moment. No matter what job they intend on using it on, there is a saw for just about anyone on the following list.

Best Circular Saws – Reviews

10Worx Worxsaw WX429L

Although this circular saw only has a 4.5-inch blade, it has the power of large saws. Because of its compact design, it weighs up to half the weight of 7.25-inch saws and can easily be used with just one hand. It also has a left-side blade design that improves the operator’s cut line-of-sight and has a safety trigger that gives the user the control they need.

And because it uses thinner blades than conventional models, it can provide the same speed of traditional saws. With an easy-set depth gauge and a 0-degree to 45-degree bevel settings, this saw is also easy enough to use for just about any project.

9Rockwell RK3441K 4.5-Inch Compact Saw

With about half the weight of 7.25-inch saws but with the same amount of power and performance, this 4.5-inch circular saw is a useful tool for just about anyone to own. Although it only weighs around 5-pounds, it can deliver up to 3,500 RPM of no-load speed and is powered by a 5-Amp motor that’s designed to not overheat.

This saw has a left-handed blade design for improved cut-line visibility, an easy-to-hold grip, and the saw has a maximum cutting depth of 1-11/16-inch at 90-degrees or 1-1/8-inch at 45-degrees. And because of its compact design, it can be wielded with just one hand.

8Skil 5680-02 7.25-Inch Saw

With a lightweight and ergonomic design, this 7.25-inch circular saw is manufactured to be as easy-to-use as it is powerful. It has a 15-Amp ball-bearing motor that provides up to 5,300 RPM no-load speed and delivers a cut of 2-7/16-inch at 90-degrees or 1-15/16-inch at 45-degrees.

This tool comes with a safety lock trigger which helps prevent accidental starts and has a wide foot plate for increased stability. Other features which can be found on this saw include a rear-view depth adjustment and on-tool wrench storage. This saw comes with a blade wrench, a 24-tooth carbide blade, and a carrying bag, too.

7Hitachi C7SB2 7.25-Inch Saw

Regardless of whether the operator needs to rip through 2x4s, plywood or other types of wood, this saw is waiting to provide the helping hand they need. It has a 15-Amp motor which can generate up to 5,800 RPM of no-load speed and a carbide-tipped blade with a 5/8-inch arbor.

This saw features a 1-27/32-inch depth of cut at 45-degrees and a 2-3/8-inch depth of cut at 90-degrees. This circular saw is made of a die-cast aluminum alloy, so it’s designed to provide years of service. And with a cutting depth lever, one-piece base, and non-slip handle, this saw has the features many people look for in one of these tools.

6Tacklife 7.25-Inch Saw With Laser Guide

Tacklife 7 25-Inch Saw With Laser Guide

This 7.25-inch saw has a lightweight aluminum guard, a built-in laser guide and adjustable cutting angles that deliver a bevel capacity of 1-4/5-inches at 45 degrees or 2.5-Inches at 90-degrees. It’s equipped with a 12.5-Amp motor that delivers up to 4,500 RPM of no-load speed.

And since it only weighs around 9-pounds, it lighter and easier to use than some other comparable saws. It’s also equipped with a rip guide for cutting precision and a double controlling switch to help prevent user accidents. Other features include a dust blower and a 40-tooth carbide blade that can cut through wood, soft metals, tile, and plywood.

5Makita XSS02Z 6.25-Inch Bare Saw

With a weight of only 7.3-pounds, this 6.5-inch circular saw can be used with less user fatigue. Equipped with a powerful motor that produces a speed of 3,700 RPM of no-load speed, this saw also has the power to cut through just about any job quickly and efficiently. It has a 50-degree maximum bevel and a 2.25-inch cutting capacity.

This tool is has a machined base that makes this saw extremely durable. And although this saw is sold without a battery, it’s compatible with other energy-star compliant Makita 18-Volt Lithium-ion batteries. This makes this a worthy tool to add to any Makita tool collection.

4Skilsaw SPT77WML-01 Worm Drive Saw

Weighing under 12-pounds, this 7.25-inch saw is one of the lightest circular saws in its class. It owes its light weight to its high-tech features which are incorporated directly into it. It’s engineered with a lightweight magnesium construction and has a powerful 15-Amp dual-field motor that’s designed to stay cool even through tough cutting projects.

This saw has a maximum cutting capacity of 2-3/8-inch at 90-degrees with a 53-degree maximum bevel capacity. It also has positive stops at 0-degrees and 45-degrees and has an anti-snag lower guard. And its worm drive gearing provides the torque needed to make it through even difficult cuts.

3Dewalt DWS535 7.25-Inch Circular Saw

A lightweight design and a powerful motor are just two of the features which make this saw an extremely popular 7.25-inch saw with many professional construction workers. Since it’s made with magnesium, it only weighs around 13.8-pounds but is equipped with a powerful motor that can deliver 4,800 RPM of no-load speed.

This tool delivers a 2-7/16-inch depth cut at 90-degrees and 1-7/8-inch depth cut at 45-degrees. It also has a maximum bevel capacity of 53-degrees. This saw comes with a carbide-tipped blade and a blade wrench for quick and easy blade replacement. All of which makes this a handy saw for just about any homeowner or workman.

2Dewalt DWE575SB Saw With Electric Brake

With a 7.25-inch width and a weight of only 8.8-pounds, this durable circular saw is a very lightweight model that’s good for home and professional use. It has a powerful motor that can deliver up to 5,100 RPM of no-load speed and has a 57-degree bevel capacity. It has 22.5 and 45-degree detents and has a 2-9/16-inch depth of cut capacity.

This makes this saw a useful tool for all kinds of different jobs including framing, home construction, and remodeling. Other key features which can be found on this tool include an integrated dust blower and a high-quality carbide-tipped blade.

1Dewalt DCS391V 20-Volt Bare Cordless Saw

This 6.5-inch 20-Volt lithium-ion cordless circular saw doesn’t come with a battery, but it does come with a carbide-tipped blade. It’s also equipped with a powerful 5,250 RMP motor that makes even the most demanding cuts easy to perform. It has a 5/8-inch arbor size and can deliver a depth of cut of 1-5/8-inch at 45-degrees and 2-1/4-inch at 90-degrees.

It is also made with an over-molded rubber grip that’s easy-to-hold and gives the operator the control they need to make precision cuts. And since this saw is made using magnesium, it’s not only durable but lightweight as well. Which is probably why it’s consistently one of the highest rated circular saws available.

Can’t Find What You’re Looking For? Check these suggestions:

Buying The Perfect Circular Saw

Circular saws are some of the most common tools that people use. Just about every garage has one of them in it, and that’s no surprise considering just how useful they are. These power tools can be used for ripping lumber, performing plunge cuts, performing finish cutting, and for about a thousand other jobs. Therefore, everyone should purchase the best circular saw that they can and add it to their tool collection.

Finding the right circular saw isn’t always easy, however. And this is especially true for people who may have little to no experience buying power tools. However, even experienced professionals can overlook features when they’re shopping for a new saw, so we decided to write this guide. A guide that will help both experienced and inexperienced power tool users to buy the perfect circular saw for them.

Choosing A Saw Style

One of the first things that any consumer is going to want to do when they’re choosing a new circular saw is to decide what type they want. These saws are available in several different styles, so the consumer should choose the one that best matches their needs and how they intend on using the tool. Below is a brief overview of some of these basic circular saw types, so consumers can choose one that’s right for them.

Sidewinder Saws

A sidewinder saw, also known as an inline-saw, is one of the most common saws currently in use. Although there are certainly left-handed saws available, most of these have the motor mounted on the right side, so that it rests on a work-piece. Since it’s designed in this way, it’s very compact and easy to use. And because these saws usually weigh less than some other types of saws, they can be handled easily. Another advantage of these types of saws is that they can create more speed because the motor is in line with the blade. This allows these saws to operate at up to 6,000 RPMs.

Worm Drive Saws

Worm drive saws are becoming increasingly popular because they’re better suited for cutting wider boards than other types of circular saws. The motor on these types of saws isn’t mounted on the side like inline saws, but are instead mounted on the back of the tool. This creates a tool that’s long but narrow. The power of the motor is then transferred by 2 gears to the blade. This causes a reduction in speed, but an actual increase in torque. The speed reduction isn’t very significant and simply means that these saws can usually operate at a speed of about 4,500 RPMs. One of the biggest complaints that power tool users have about worm drive saws is that they need regular maintenance to operate properly. However, that’s not usually a big deal, and for most worm drive saws it usually means that it needs to be oiled occasionally.

Hypoid Circular Saws

Another type of saw available is the Hypoid saw. Although this tool is often mistaken for worm-drive saws due to their similar looks, the truth of the matter is that these saws are very different. Sure, both of them have motors mounted behind their blades, but Hypoid saws are equipped with a special gearbox and transmission that allows it to do its job. This saw is designed to be more powerful, but retain this power while increasing blade contact with the workpieces and boosting efficiency. They’re also quieter and more stable. And because they’re internal parts are sealed, they don’t require the user to oil it the way that worm drive saws do. Like worm drives, Hypoid circular saws are heavier than inline saws.

Choose A Corded Or Cordless Circular Saw

The next thing the consumer should think about is whether they want a corded or cordless circular saw. Both of these types of circular saws have their pros and cons, so it’s up to the consumer to decide which one might be best for them. To help our readers consider how corded and cordless models differ, we placed the pros and cons of both of them below.

Corded Saws


  • They usually have more power
  • Don’t have to worry about charging batteries


  • Power cord limits where it can be used

Cordless Saws


  • They’re portable
  • They don’t require access to an outlet


  • Batteries take several hours to charge
  • The user often has to carry several battery packs for extended work sessions

Other Features To Consider

After choosing the type of circular saw needed, as well as how it’s powered, the consumer is extremely close to choosing the best circular saw for their needs. However, they’re still a few other things to consider before finalizing any purchase. Below are some other features the user should consider to make sure the circular saw they buy is the right fit for them.

  • Choose The Saw’s Amps – As a general rule, the higher the amperage of a circular saw, the more cutting power it has, so consumers should choose a higher Amp model for heavy-duty jobs.
  • Bevel Capacity – The bevel capacity determines the maximum bevel cut that the circular saw is capable of performing.
  • Bevel Stops – These are saw presets that make adjusting the circular saw for bevel adjustments a lot easier.
  • Electric Brakes – These brakes reverse electrical flow to the circular saw’s motor when the trigger is let go of. This stops blade momentum and makes the saw safer to use.
  • Blade Capacity – This is the maximum amount of depth that the circular saw can cut. The bigger the saw’s blade, the deeper it can cut.
  • Spindle Locks – These are sometimes known as shaft locks and they immobilize the blade so it can be safely changed.
  • Laser Guides – This feature makes the saw more accurate.

A Quick Word On Circular Saw Blades

If the consumer is purchasing both a circular saw and extra blades for the saw, then they should make sure that the two are compatible. They should also consider the following blade types to ensure that they purchase the right blade for whatever job they’re attempting to perform. Let’s take a quick look at each of these different blades to find out a little bit more about them.

  • Masonry Blades: These blades are designed for cutting masonry materials such as cinder blocks, concrete, brick or cinder blocks.
  • HS Steel Blades: These are made out of speed and are designed to stay sharper during high-speed cutting operations.
  • Tile-Cutting Blades: As their name suggests, these blades are designed for cutting tile. High-end tile cutting blades are usually diamond-tipped.
  • Carbide-Tipped Blades: These cost more than other types of blades, but they stay sharper than HS steel blades due to them being tipped with carbide.