If you have tried shopping for 6×9 speakers, then you probably have a strong appreciation for just how overwhelming your choices can get. This is mainly because while these speakers are very important, not all brands will get the job done. And let’s face it, when it comes to sound quality, nobody wants a compromise.
Some speakers don’t have very good sound, others will start to fall apart too soon, and more than a few are grossly overpriced. For these reasons, choosing the best 6×9 speaker becomes more complicated than most people expect.
That said, you can still get the best speaker for your needs by taking into consideration sound quality and consumer feedback among other things. And so, here are 10 of the best 6×9 speakers in the market today.
Best 6 by 9 Car Speakers – Reviews
10Infinity Reference 6×9 Inch 300-Watt 3-Way Loudspeaker
You can expect to enjoy enhanced bass output, better efficiency, and a lasting use experience when you use this 6×9 speaker. The peak power for this speaker is 300 watts. Distortion can at times be a problem with speakers when they are made to provide greater output.
But this particular model has been designed to overcome this problem with its edge-driven dome which produces better midrange and tweeter sounds under such use conditions. The tweeter level is also adjustable for optimal surround sound.
9Alpine SPR-69 6×9 2-Way Coaxial Speakers
As far as 6×9 speakers go, this is one of the best pairs you can own. It has 600 watts of peak power, 300 watts for each speaker. In terms of RMS, that translates into 200 watts; 100 watts for each speaker.
This incredible raw power translates into strong bass and midrange sounds rendered in superb quality with the help of high quality speaker design. That explains why many people in the market for 6×9 speakers have found a perfect solution in this particular product.
8Polk Audio DB691 6×9 inch 3-Way Speakers
With a rating of 125 watts and 4 ohms, these speakers possess a lot of acoustic might. But what truly sets them apart is the quality of sound they can deliver. And with an efficiency of 95 dB, that quality is nothing short of premium.
The speakers are constructed using 1-inch liquid-cooled silk-polymer composite dome tweeter. As for durability, you will have no issues when you decide to use this particular speaker. It can stand up to extreme temperatures and sunlight, and also last for many years without experiencing a dip in sound output quality.
7Kicker DS693 6×9 3-Way Speakers
Its specs include 70 watts of RMS power, 4 ohm impedance, and sensitivity of 92 dB. The speakers can produce great quality sound for your car and other applications. These speakers will demonstrate their incredible power when it comes to mids and highs, because they offer a truly immersive listening experience.
The bold rugged design is also a huge plus for buyers who are a little more concerned about aesthetics. And installation efficiency has been taken into consideration as well, since these speakers have mounting hardware, speaker wires, as well as grilles as part of the original purchase.
6Rockford Fosgate Prime 6×9 Inch 3-Way Full-Range Coaxial Speaker
This speaker has a compelling list of features. They include integrated tweeter crossover, rubber surround, a silk dome, grilles and mounting hardware among other features. Generally, this speaker will give you very good mid and high sounds.
In fact, the price of this speaker can deceive you into thinking that the sound quality may not be that good, but it is definitely up to the mark. So, don’t hesitate to buy these speakers if they are in your budget range, you will get more than their price tag implies you should.
5BOSS Audio CH6930 400 Watt Speakers
With its impedance at 4 ohms, a frequency response of between 50 Hz and 20 MHz and sensitivity at 92 dB, this might come off as a typical 6 by 9 speaker; but it is not.
The woofer cone features poly injection and the surround consists of rubber while the basket is stamped. But more importantly, the speaker has a tweeter and a speaker that will deliver superb sound quality without fail.
4Kenwood KFC-69655 6×9 Inches 3-Way 400W Speakers
This pair of speaker is collectively capable of handling 400 watts in peak power and 45 watts of RMS power. The speakers are made of a woofer cone, a 2” polyetherimide cone tweeter, as well as a 1/2” ceramic super tweeter.
This incredible blend of features, in addition to superior design bravado have made this speaker capable of producing high quality sound that has already earned it many positive reviews in the market.
3Pioneer TS-A6986R A-Series 6×9 600W 4-Way Speakers
These are obviously very powerful speakers – 600W is quite a bit of power. In nominal power, this translates into 100 watts.
These 4-way speakers are suitable for many uses, especially where clear crisp clear sound is a high priority. The woofer cone is made of multilayer mica matrix and a soft-dome tweeter.
2JBL GTO938 6×9 Inch 3-Way Loudspeaker
Its specs might not make it obvious why this is one of the best speaker you can own at the moment. The speaker has 600 watts of power in each pair, or 200 watts of RMS power in a pair. The frequency response is between 45 Hz and 21 Khz, an impedance of 2 ohms and an above-average sensitivity of 92 dB.
These speakers can handle power better for reduced distortion, and their sound quality and efficiency have made them incredibly popular among car owners. The bass output is also quite impressive on these speakers, something many rival products don’t always manage. Finally, these speakers can also stand up brilliantly to humidity and sunlight; and they are easy to install.
1Rockford Fosgate Punch 6×9 Inches Full Range Coaxial Speakers
In many ways, these Rockford speakers are the best you can get from the market at the moment. They have fantastic sound with their 91 dB sensitivity, and 75 watts of RMS power. The speakers are constructed using butyl rubber surround, PEI dome tweeter, a FlexFit basket design, and a mineral-filled and polypropylene injection molded cone.
But maybe the secret to these speaker’s top position in this speaker niche is that they have the VAST (Vertical Attach Surround Technique) Surround feature, which is able to improve the effectiveness of the radiating cone by 25%. Whatever the case, this is without a doubt the favorite 6 by 9 speaker in the market right now among many users.
Can’t Find What You’re Looking For? Check these suggestions:
Choosing the Best New Speakers
When you’re searching for new 6×9 speakers, there are a few things to keep in mind to get the best performing speakers possible. You need to keep in mind the size of the speakers, their sensitivity, their power handling capability and the build quality of the unit. That isn’t the only considerations that have to be kept in mind, however. The user also has to decide between component or coaxial speakers.
The component versus coaxial debate is one that’s been raging for years now. Component speakers offer the best sound quality but they’re usually way more expensive than coaxial speakers. On the other hand, coaxial speakers are usually the easiest ones to install and are harder to mess up if you’re doing a DIY install and don’t have a lot of experience installing speakers. Of course, the ultimate decision is up to you and will depend on your skill set, the ease of the install and your expectations.
How to Install Rear Car Speakers
Once you’ve found the best 6×9 car speakers and received them, it’s time to install them. While some people will always prefer having a professional install the speakers for them, other people like to take things into their own hands and install the speakers themselves. If you fall in the latter category, then put on your seat belt because we’re going to go over how to install them.
While this is only a general guide, and installation will vary from vehicle to vehicle, it will give most people a general overview of the process involved. Since this process is only a general overview and isn’t exactly a step-by-step guide, it’s always important to read your speaker’s instructions thoroughly before beginning this project.
What You’ll Need
Before you begin, there are a few items that you should gather together. Obviously, you are going to need the 6-inch by 9-inch rear speakers, but you are also going to need a speaker template. Some of the better 6×9 speakers come with a template included with them, but if your particular speak doesn’t, then you’re going to have to make one.
There are two ways you can do this: you can either use your speaker to make your own template, or you can find a website that has templates and download them to be printed out. The rest of the following tools needed for this job should be self-explanatory.
- Cutting tool with grinding wheel
- Cutting wheels
- Cordless drill
- 1/8-inch drill bit
- Mounting screws
- Gasket material
- 3/8-inch ratchet
- 12-mm socket
- Flathead screwdriver
- Safety glasses
- Dust mask
- Ear protection
Step One: Disconnect Your Battery
For safety purposes, you should always disconnect your battery when you’re removing old speakers and installing new ones. This can easily be done by just removing the negative cable off of the terminal while you’re working on the vehicle.
Step Two: Removing the Factory Installed Speakers
Remove the speaker grills for the factory-installed speakers using your thumb. If necessary, you can also use your screwdriver to pop up this grill, but be careful because it’s extremely easy to damage the grill using a screwdriver. Once you have removed the factory speaker’s grill, unscrew the mounting screws from the speaker, pull it out and disconnect it from its connector.
Step Three: Trace Out Your Template
Place your template over where the old speaker was and use your sharpie to trace the outline of your template into the installation that’s in the hole. Make sure that the center hole of the template lines up with where you think the center hole of the speaker should be located.
Step Four: Cutting Out a Hole
While you’re wearing your dust mask, safety glasses, and earplugs, you can then begin cutting out the hole for your speaker. Take your cutting tool and use it to cut out the template outline you marked on the insulation fabric in the earlier step.
Once the material has been cut, you can then get rid of the material that’s been cut out. Making sure that you don’t deviate from your cutout too much, cut along the stock mounting tabs.
Step Five: Smooth Out the Opening
Once you have cut out the hole for your speaker, you’ll probably need to clean up the edges of the hole. You can do this by using your Dremel with a grinding wheel to smooth out the edges of the opening.
Step Six: Do a Test Speaker Insertion
Place your speaker into the hole you just made and examine it. Are there edges where the insulation is still in the way? If there is still excess material, then you will need to remove it. Does the speaker fit properly? If it doesn’t, then you will need to make adjustments as needed.
Step Seven: Install the Speaker Gasket
Once you’re sure that the speaker fits perfectly, it’s now time to take the speaker out and install the gasket. The gasket wraps around the frame of the speaker and prevents the speaker from rattling against the cutout hole.
Step Eight: Mount Your Speaker
Using the speaker’s mounting positions as a guide, go ahead and drill out each mounting screw hole and then connect the speaker wire connection to the speaker. Now install the speaker in the hole and tighten it down. When that’s been done to your satisfaction, place the grill cover back on your speaker.
Step Nine: Reconnect Your Battery
Now all that has to be done is to reconnect the battery and test out your new speaker.
Replacing your old 6×9-inch car speakers doesn’t have to be a big deal, as you can clearly see. With a little bit of planning and the proper tools, just about anyone can install or replace their new speakers.
Which makes you wonder why so many people decide to put up with the flat, dull factory-installed stock speakers that came with their car when they can revolutionize their listening experience with jazzy new speakers.